Inspections
mins

What Is a Fire Pump, and How Often Do They Need Inspections?

March 14, 2023
url

A fire pump is a pump that increases water pressure in a fire protection system, typically in a high-rise building or large warehouse. The source water might be in a tank or is might be in an open reservoir. The point of the fire pump is to adequately supply water and water pressure if needed during an emergency fire.

There are many different types of fire pumps that are used in different types and sizes of fire protection systems including the following:

  • Positive Displacement Pumps
  • Horizontal Split-Case Pumps
  • Centrifugal
  • Vertical Turbine Pumps
  • In-Line Pumps
  • End Suction Pumps
  • Multistage Multiport Pumps

When fire pumps need to be inspected is determined by standards in the BC Fire Code, Vancouver Bylaws, NFPA 20 and NFPA 25. Basically, the fire pump needs a complete inspection annually at full capacity. However, electric motors and internal combustion engine pumps need to be tested monthly. In addition, several other parts of the system also require monthly inspection.

Pump room temperature has to be checked weekly, as well as the level of the water reservoir. Electric pumps also have to be turned on for 10 minutes per week. Diesel pumps require being turned on for 30 minutes per week to check that they are in proper working order.

Fire pumps are critical for a fire protection system. So, not only do they require frequent inspection and testing, but it is also important that the individuals inspecting them have the proper experience and credentials.

If you have questions about your fire pumps or your fire protection system, call the experts at Van Fire in Richmond, BC, to help you at (604) 706-0306.

Share this post
HOT OFF THE PRESS
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Inspections
6
mins

Best Practices for Fire Extinguisher Maintenance and Service

A portable fire extinguisher is the only piece of fire protection equipment in most buildings that an ordinary occupant is expected to operate, usually within the first minute of a fire, usually without having touched one before.It is also the piece of equipment most likely to have been quietly neglected. Extinguishers get moved, blocked, borrowed, knocked, slowly depressurised and painted around. Unlike a sprinkler head or an alarm panel, nothing monitors them, so a unit that will not discharge looks exactly like one that will.The maintenance requirements exist to close that gap, and they are more specific than most building owners realise.
Safety & Planning
7
mins

Emergency Lights Maintenance: Tips for Regular Inspection

Emergency lighting is the onlyfire protection system in your building that does nothing at all until theworst possible moment. A sprinkler head is visible. An alarm panel beeps whensomething is wrong. A set of emergency lights sits on the wall for years looking perfectly fine, and whether it works is a question nobody answers untilthe power actually fails.That is why the code treats itthe way it does, and why the testing schedule is the one most commonly skippedin Metro Vancouver buildings.

Fire Safety
made simple.

If you want a simple, reliable solution for ALL of your fire protection needs, there's only one place to go. Don’t delay. Contact Radius today!

Contact Radius